Custom Wall Decals
Outdoor Wall Graphics are a great solution to turn your walls into advertising space. Put them up as temporary signage. Rather than banners that need to be hung or supported by stakes, Removable Wall Decals stick to any flat surface. They are also designed with a silver backing that blocks out any underlying images, so they are a great idea for updating your brand, logo, or name, and you can use them temporarily over your permanent signage. Just hand us your custom design and will do the rest of the work for you. If you are looking for decals to be placed on the ground then check out our Street and Sidewalk Decals.
Stick Wall Decals are also abrasion and weather resistant, conformable to unsmooth or uneven surfaces, can be installed and removed without special tools or extra hassle, and are certified slip-resistant.
Custom Stick Wall Decals decals are perfect for events, festivals, races, campus tours, and walkways to direct foot traffic, advertise sales, brand storefronts, and more.
Stick Wall Decals are available for either short-term or long-term use. They are great for communicating messages and are designed to handle heavy foot traffic. They are adhesive-backed vinyl printed in full color on one side of 4 mil adhesive with a luster finish. Stick Wall Decals come in a range of sizes from 12" x 12" to 100" by 120".
Foil-based vs. Vinyl Wall Decals
While vinyl-based decals are the norm in many situations, foil-based wall decals offer a number of advantages that make them an easy choice over vinyl products for outdoor use on the surfaces outlined above. These advantages include the ability to conform or be applied to uneven surfaces, the installation without specialized tools, far superior durability, a certified non-slip surface, easier and cleaner removal, and a more vibrantly printed design that appears as if it has been painted onto the end surface. We're positive you'll love your custom foil-based wall graphics!
Features
- Grip and unique non-skid surface
- Durable plastic frame
- Indoor & outdoor versatility
- Swap designs in & out with ease
- Lightweight portability
- Easy to clean
- Removable Stickers
Material
- 4 mil aluminum floor graphic
Compatible Surfaces
Concrete
Asphalt
Brick
Stucco
Vinyl
Tile
Cinderblock
Terrazzo
- Metal
Installation and Removal
Most decals for walls require hard cleaning. But because our designs are foil-based, therefore it should be easier to install your custom stick wall graphic. Effortlessly just sweep the surface dirt away from your intended location and now you are ready to install your custom graphic. You don't need anything else but your hands just simply press and stick your design onto the intended surface.
Giant Wall Stickers Features
Durability: Unlike regular outdoor vinyl graphics, our aluminum graphics are designed to be installed in areas where there are heavy amounts of pedestrians.
Versatility: The Stick Wall decal is compatible with a wide range of smooth surfaces, therefore, making it a versatile outdoor floor graphic.
Superior Printing: Expect more vibrant colors and fresh reproduction of your logo, text, and graphics.
Conformance: Our wall graphics are compatible with both smooth and unsmooth surfaces so don't be stressed over whether your surface is perfectly smooth.
Slip Resistance: In any weather condition our street and sidewalk decal is very safe to walk on. So you can feel safe installing them anywhere.
Custom Sizes
Your custom street and sidewalk decal could be any size you desire from 12'' x 12'' up to 100'' x 120''.
Custom Shapes
Your custom decal cut is cut to any shape you desire. For the best results, we recommend simple shapes.
Additional Specs
Weight | .09 Ibs per square foot |
Details | 18 mil aluminum-foil-based outdoor wall graphic digitally printed with UV ink. Easily installed and removed with a wide variety of compatible surfaces |
Uses | Storefronts, sidewalks, events, driveways, races, pool surfaces, etc. |
Temperature | -40 F until 302 F |
Print Method | UV ink printed in a full CMYK color |
Estimated Lifespan | 1 year with proper care |
Surface Preparation
Sweep the surface to make sure that the floor is free of loose materials or dirt. for proper adhesion.
Sweep the surface to make sure that the floor is free of loose materials or dirt. for proper adhesion.
Make sure that the surface is dry, if not then power wash the area then allow it to dry before placing the graphic.
Make sure that the surface is dry, if not then power wash the area then allow it to dry before placing the graphic.
Avoid installing your graphic on any foreign substances like oil, grease, etc.
A mixture of 50/50 to 70/30 percent isopropyl alcohol plus water can be used for surfaces where adhesion is difficult. Right after applying the solution, wipe with a soft cloth.
Installing The Decal
Once your surface is completely dry and you have followed the instructions on top now we could start applying the decal. First off remove the colored liner from the back of the decal. Keep in mind the decal is not repositionable so before taking off the liner make sure you have an intended spot to install your decal on.
Next, lay the decal on the intended surface, and press firmly from the center moving towards the edges. If on an uneven surface layout your decal slowly by slowly.
Next, use a roller to go through the whole decal making sure that it adheres strongly to the surface and to remove any creases or bubbles.
That's it your decal is ready to go and do its job. However, it will take up to 24 hours for the decal's adhesive to fully dry.
Care
If in need to clean your decal lightly spray with water from a low-pressure hose and sweep with a broom. Do not use harsh cleaning chemicals as they could damage your decal. If wanting to use a power washer do not use it on intense mode or too close to the graphic or they might damage the decal, especially near the edges.
Why Choose Us?
We are an established company located in New York City. We specialize in creating high-quality, affordable brushed aluminum signs at a reasonable price. Our customer service is second to none and we stand behind all of our products. We take pride in producing the best quality signs possible. Our team of designers and engineers is here to help you every step of the way. Please contact us today for more details about our services.
Frequently Asked Questions
How do I transform a room?
The simplest way to transform the look of a room is with a beautiful wall decal.
What Is a Wall Sticker?
A Wall decal, also known as a wall sticker, wall tattoo, or wall vinyl, is a vinyl sticker that is affixed to a wall or other smooth surface for decoration and informational purposes.
What are the benefits of wall decals?
Unlike paint, wall decals go on quickly and easily and require no tarps, tape, or “wet paint” signs.
What are the different types of wall decals?
Not only are they a great solution for commitment-phobes because they are completely removable, but vinyl wall decals, wall stickers, and murals are also a great solution for renters who are not allowed to paint or hang wallpaper.
What is contour cutting?
Contour cutting is the practice in which your design will be printed in the exact shape of your design. For example, if you have a hexagonal design and choose to print it using contour cutting, your design will be printed in the shape of a hexagon. If you chose not to have contour cutting done, your design would be printed in a square or rectangle around your design, depending on the dimensions of your design.
What material is the Wall Decal printed on?
The Decal is printed on Textured Aluminum Foil.
How would I clean my Decal?
If in need to clean your decal lightly spray with water from a low-pressure hose and sweep with a broom. Do not use harsh cleaning chemicals as they could damage your decal. If wanting to use a power washer do not use it on intense mode or too close to the graphic or they might damage the decal, especially near the edges.
What is the estimated lifespan for the Outdoor Wall Decals?
The lifespan of the outdoor decal is 1 year with proper care and usage.
Will I receive my order in the turnaround time after placing the order?
After you place your order and upload your design, we will check to see if your design has the following:
- correct file size
- correct file format
- high-quality (if it looks blurry, difficult to read, etc.)
- other factors that may affect its design
After we finalize the design and you approve it, we will then put your floor graphic(s) into production. You should receive the floor graphic(s) within the said turnaround time after it's been put into production!
I want this item, but I don't want to install it myself. Can I get an installation team to set it up for me?
Yes, Printleaf has a national network of professional, experienced installation teams that will be happy to install your floor graphics for you. To request a floor graphic installation, please send us an email at sales@printleaf.com or (212) 328-1174 within 48 hours after placing your order to request a custom quote for your installation.